服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb2O3 Masterbatch for PVC Artificial Leather & Synthetic Leather

发布日期:2026-11-21 05:35:16   浏览量:0

Antimony trioxide (Sb2O3) masterbatch is widely used in flame-retardant PVC artificial and synthetic leather for sofas, automotive seats, footwear, luggage and wall coverings. PVC leather formulations require compliance with flammability standards such as FMVSS 302, BS 5852 or TB 117, which are typically met with a halogen–antimony synergistic system.

Formulation and Dosing

  • Use plasticized PVC paste (plastisol) carriers; declare plasticizer content (DOP/DINP/DOA) since plasticizers strongly affect both flammability and Sb2O3 efficiency.
  • Maintain halogen:Sb molar ratio near 3:1. Because PVC itself releases chlorine, calculate effective chlorine from both the polymer and chlorinated paraffin co-additives before setting Sb2O3 dose; typical effective Sb2O3 content is 3–5 wt% on total compound.
  • Pair with chlorinated paraffin CP-52/CP-70 and optionally 2–4 phr zinc borate for smoke and afterglow suppression.

Processing Considerations

  • In calendering or coating lines, fine grades D50 0.8–1.5 µm prevent white specks on the embossed surface and reduce die build-up.
  • Wet dispersion in plastisol should be evaluated for viscosity drift and settling overnight before production.
  • Foamed synthetic leather: check ADC blowing agent interaction; excessive Sb2O3 can over-nucleate cells and reduce elasticity.
  • Watch plate-out on embossing rolls during long runs; schedule roll cleaning.

Quality and Acceptance

  • CoA items: purity ≥ 99.5%, moisture < 0.3%, Pb < 50 ppm, D50/D97, whiteness ≥ 96.
  • Verify flame performance on finished leather (not resin alone) via the applicable standard; run fogging and cold-flex tests for automotive grades.
  • Request per-lot retained samples (200 g, 12 months) and batch traceability to the delivered ingot lots for full supply-chain traceability.
在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们