Sb2O3 Masterbatch for Rigid PVC Rainwater Gutters & Downpipes
发布日期:2026-11-21 05:35:39 浏览量:0
Why masterbatch over powder
- Clean, dust-free dosing on high-throughput gutter extrusion/corrugation lines.
- Consistent per-lot dispersion; avoids powder segregation and dusting at the hopper.
- One carrier system (rigid-PVC or EVA-CPE) keeps Cl:Sb dosing predictable batch to batch.
Carrier selection
- Rigid PVC: match K-value (58–65) of the base resin; or use EVA/CPE-modified carrier for impact grades.
- Declare any plasticizer content in flexible variants; keep the masterbatch load within the resin's dry-blend tolerance.
Dosing & ratio
- Effective Sb2O3 3–5 phr (rigid gutter), 4–6 phr (flexible downpipe seals).
- Chlorine source (CP-52/70): target Cl:Sb ≈ 3:1 molar on the halogen actually in the compound.
- If switching to a brominated co-additive, retune to Br:Sb ≈ 3:1 on effective bromine, not masterbatch weight.
- Optional zinc borate 30–50% of Sb2O3 for smoke suppression; re-check LOI at final wall thickness.
Processing controls
- Pre-dry 2–4 h at 80 °C when stored above 60% RH (prevents moisture streaks on profile surface).
- Melt ≤ 190 °C; watch die and sizing/calibration plate-out — run 2–4 h and inspect for bloom/speck.
- Two-roll or torque heat-stability test: reject if torque drop exceeds 10–15% vs. baseline.
- Impact and Vicat softening after full formulation; ensure < 10% drop vs. non-flame-retardant reference.
End-product qualification
- Reaction-to-fire rating verified at the target wall thickness (EN 13501-1 / UL94), not on plaques.
- QUV/xenon weathering ΔE < 2.0 at 500–1000 h; cold-bend at −20 °C on finished profile.
- Verify weld-line strength < 10% drop and gloss consistency.
Supplier CoA checks (per lot)
- Purity ≥ 99.5%, moisture < 0.3%, D50 0.8–1.5 µm, Pb < 50 ppm, Fe < 100 ppm, whiteness ΔE < 1.
- CoA batch number must match retained sample and lot archive; keep 200 g per lot for 12 months.
Trial & requalification
- Line-trial qualification before batch commitment; annual requalification of carrier and grade.