Application Context
PVC high-voltage cable sheath (4-8 phr effective Sb2O3) and semi-conductive/conductive screening layers demand clean dispersion, low haze, and stable electrical properties. Powder addition risks white specks, poor lot consistency, and dust contamination on the line.
Masterbatch-Over-Powder Advantages
- Clean dosing: reduced dust on extrusion floor, consistent addition rate
- Fine dispersion: D50 0.8-1.5 µm prevents specks in 0.5-2.0 mm sheath walls
- Lot consistency: CoA per lot; batch-to-batch whiteness ΔE < 1
Formulation Pointers
- Carrier matching: flexible-PVC carrier with declared plasticizer (DINP/DOA); K-value 58-65 for rigid sheath layers; EVA-CPE for semi-conductive compatibility
- Halogen-antimony synergy: Cl:Sb ≈ 3:1 with chlorinated paraffin CP-52/70, or Br:Sb ≈ 3:1 on effective bromine when a brominated FR is used
- Dose: 4-6 phr rigid sheath / 5-8 phr flexible; on effective Sb2O3 content, not compound weight
- Zinc borate 30-50% co-additive for smoke suppression
Processing Controls
- Pre-dry 2-4 h at 70-80 °C when storage humidity > 60% RH
- Melt temperature ≤ 190 °C to limit plate-out; watch die/mandrel and cooling-bath build-up
- Trial QC per lot: LOI / IEC 60332-1 vertical burn, dielectric strength, cold-bend −20 °C, 7-day water-immersion insulation resistance
- Two-roll dispersion and screen-pack pressure check as dispersion proxies
CoA Qualification
Purity ≥ 99.5% · Moisture < 0.3% · D50 0.8-1.5 µm · Pb < 50 ppm · Fe < 100 ppm · Whiteness ΔE < 1
Retain 200 g per lot for 12 months; annual re-qualification recommended.