服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb2O3 Masterbatch for PVC Cable Trails & Floor Marking Tape: Wear-Layer Dosing, Cl:Sb≈3:1 with CP-52/70, Fine D50 0.8–1.5µm Anti Bloom, Abrasion & Flex-Fatigue QC

发布日期:2026-11-21 05:35:58   浏览量:0

Positioning: PVC marking/protective trail tape is a thin, heavily plasticized, high-wear product family where flame retardancy (E84 / EN 13501-1 fl class) is sold together with abrasion life. Powder Sb2O3 in plasticized PVC: dust, white specks on embossed surfaces, moisture pickup. Masterbatch solves dosing accuracy and dispersion per lot.

Formulation & processing - Carrier: flexible PVC K65–72 with declared plasticizer (DINP/DOA) within ±5% of your compound; MFI-free but stated Brabender plasticity range. - Dose: 3–5 phr effective Sb2O3 in wear layer; reduce in foam underlayer unless FR to core is specified. - Halogen synergy: Cl:Sb ≈ 3:1 with chlorinated paraffin CP-52/70 (also acts as secondary plasticizer — re-balance viscosity); or Br:Sb ≈ 3:1 by effective bromine if brominated FR used. - Antimony trioxide fine grade D50 0.8–1.5µm — anti surface bloom and specks on 0.5–1.2mm wear layers; coarse grades show white bloom after UV exposure. - Pre-dry 2–4h at 70–80°C when storage RH >60%. - Melt ≤190°C: plate-out discolors light-grey/yellow marking surfaces; watch die and calender roll build-up. - Flex fatigue: tape on industrial floors sees 10⁵+ roll-over cycles; check crack initiation at 10⁶ cycles at −10°C.

End-product QC per lot: abrasion (Taber H-18) mass loss, LOI/vertical burn at finished thickness, surface ΔE after 500h QUV, initial color/vicat.

CoA acceptance per lot: purity ≥99.5%, moisture <0.3%, Pb <50ppm, Fe <100ppm, D50/D97, whiteness ΔE<1. 200g retained sample per lot, 12 months; annual requalification.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们