Sb2O3 Masterbatch for Flame-Retardant ABS Appliance Housings (Washing Machines / Air-Conditioner Panels)
发布日期:2026-11-21 05:35:59 浏览量:0
- Dose & ratio: effective Sb2O3 4–5 wt% on polymer; Br:Sb ≈ 3:1 molar with brominated epoxy oligomers or decabromodiphenyl ethane (DBDPE) — recalculate on the bromine actually present, not compound weight.
- Carrier match: ABS/SAN carrier, MFI within 10–15% of base resin to avoid short-shot on large thin-wall panels; high-shear twin-screw dispersion, D50 0.8–1.5 µm anti white-speck on gloss housings.
- Processing: pre-dry masterbatch and resin 2–4 h at 80 °C when storage >60% RH; melt ≤240 °C — DBDPE processing tolerance <325 °C, plate-out/ mould-fouling watch every 2–4 h.
- QC: UL94 V-0 at final wall thickness (1.5–2.5 mm) on moulded housings, plus CTI check near terminals; gloss & impact retention <10% drop vs. unfilled control.
- CoA per lot: purity ≥99.5%, moisture <0.3%, D50/D97 reported, Pb <50ppm, Fe <100ppm, whiteness ΔE<1; 200 g retained sample, 12 months; annual requalification.