Application context
SPC (stone-plastic composite) / WPC (wood-plastic composite) rigid-core flooring is a fast-growing flooring segment. The rigid core is a highly CaCO₃-filled rigid-PVC sheet (SPC) or wood-flour-filled PVC (WPC), laminated with a decorative film and a transparent PVC wear layer. Flame retardancy, dimensional stability and a defect-free surface are the buying criteria for building-material distributors and flooring compounders.
Why masterbatch over raw powder
- High CaCO₃ loading (60–80 phr) already makes the core brittle-prone; a powder Sb₂O₃ can agglomerate into white specks visible through thin (0.3–0.5 mm) wear layers and on the core surface.
- Dust-free dosing keeps the calender/co-extrusion line and operator clean; lot-consistency matters for colour-matched batches.
- A masterbatch lets you decouple carrier (rigid-PVC K58-65 or a lightly plasticised PVC carrier) from the Sb₂O₃ loading, so the same carrier can carry Sb₂O₃ alone or an Sb₂O₃ + zinc-borate smoke-suppression package.
Dosing and formulation
- Effective Sb₂O₃ 3–5 phr on the core; wear layer usually 2–4 phr effective.
- Halogen source: rigid-PVC chlorine base, so a Cl:Sb ≈ 3:1 synergy with chlorinated paraffin (CP-52/70) is the natural pairing. If a brominated FR is used for the wear layer, retune to Br:Sb ≈ 3:1 on effective bromine, not compound weight.
- Smoke suppression: substitute 30–50% of the Sb₂O₃ with zinc borate where EN 13501-1 / ASTM E84 smoke index matters.
- Fine-grade Sb₂O₃ (D50 0.8–1.5 µm) to avoid surface specks and to keep haze low where a translucent design layer is used.
Processing and QC checks
- Pre-dry the masterbatch 2–4 h at 70–80 °C if stored >60% RH (Sb₂O₃ itself is low-moisture but the carrier resin can pick up moisture and cause surface micro-defects).
- Melt ≤190 °C; watch die, calender roll and embossing-roll plate-out on long runs.
- Dispersion proxy: two-roll mill check + screen-pack pressure trend; visual edge/surface scan for specks at production speed.
- Dimensional: thickness uniformity ±0.05 mm, no warpage; locking-profile integrity.
- Fire: reaction-to-fire class and LOI on the finished laminated plank (not the core alone).
- Mechanical: impact retention and indentation resistance (Brinell) on the assembled plank.
CoA acceptance criteria (per lot)
Purity ≥99.5% Sb₂O₃ · moisture <0.3% · D50 0.8–1.5 µm · Pb <50 ppm · Fe <100 ppm · whiteness ΔE <1 · chloride residual declared (relevant where Cl:Sb synergy is relied on).
Commercial discipline
- Keep 200 g per-lot retained sample for 12 months; run a line trial on finished planks (haze, specks, fire class, dimensional) before committing a batch.
- Annual requalification; retest after any carrier or FR-source change.
- Buyer verifies CoA batch number ↔ retained sample ↔ lot archive linkage (≥5 years) for traceability and warranty claims.