Antimony trioxide is chemically stable but physically particular — it can cake, absorb moisture, and lose flowability when handled badly. Good transport and storage practice protects both product quality and downstream performance.
Packaging standards
Commercial Sb2O3 is typically packed in 25 kg woven bags with inner polyethylene liners, or in one-tonne jumbo bags for bulk shipments. The inner liner is important: it blocks moisture ingress and keeps the fine white powder from leaking through the woven shell.
Storage requirements
- Keep it dry. Although Sb2O3 is barely soluble in water, absorbed moisture causes caking, which makes weighing and dispersion harder at the factory.
- Temperature does not matter much (stable below its 656 °C melting point), but avoid storing next to strong oxidizers, acids, or alkalis.
- Stack bags on pallets, off the floor, away from walls, in a ventilated warehouse — never directly on concrete where condensation collects.
Transport precautions
- Protect bags from rain and sea-freight humidity; use containers with desiccant for long voyages.
- Avoid rough handling that can ruptures liners; spilled fine white powder is both a product loss and a workplace dust hazard.
- Keep cargo documents aligned: HS code 2825.80, net weight per package, and lot numbers should match the certificate of analysis shipped with the goods.
Summary
Antimony trioxide is not a dangerous chemical in transit, but careless storage turns a free-flowing white powder into lumpy, hard-to-dispense material. Dry palletted storage, intact inner liners, and clean paperwork are the three things that keep Sb2O3 quality intact from the plant gate to your mixer.