服务热线:
18971017202
您的位置:首页 >> 新闻中心

Antimony Trioxide (Sb2O3) for ABS / Polycarbonate: Dosage & Selection Points

发布日期:2026-11-21 05:34:01   浏览量:0

Antimony trioxide (Sb2O3) is the most widely used halogen-flame-retardant synergist for engineering plastics such as ABS and polycarbonate-based systems. For buyers, the first question is not purity alone but how Sb2O3 grade, particle size and dosage match the resin system.

Typical dosage guidance: - ABS + decabromodiphenyl ether (or its substitutes): Sb2O3 / bromine ratio around 1:3, common Sb2O3 loading 4–8 phr, balancing UL-94 V-0 rating and impact strength. - HIPS and PC/ABS blends: lower bromine is needed, and finer Sb2O3 (smaller average particle size, narrow distribution) helps reduce haze and maintain gloss on visible parts. - PVC/cable compounds: Sb2O3 is often used together with zinc borate to partly replace antimony loading and control cost and smoke density.

Selection checks for purchasing: 1. Purity: 99.5% and above grades for electronics and wire & cable; 99.2–99.8% is the common commercial window. Request certificate of analysis with As, Pb, Fe limits. 2. Particle size: average particle size and D97 matter more than a single figure; fine-particle grades reduce impact loss in ABS. 3. Whiteness: high whiteness (≥97) supports light-colored and opaque masterbatch applications. 4. Consistency: batch-to-batch stability of both purity and particle size, verified by incoming CoA comparison.

Hubei Zhongti Intelligent Technology supplies antimony ingots and antimony trioxide with export documentation and batch CoA. Contact us for a material recommendation matched to your resin system and target flame-retardant rating.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们