服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb2O3: Masterbatch vs. Powder for Polypropylene Flame Retardancy

发布日期:2026-11-21 05:34:03   浏览量:0

Polypropylene (PP) processors choosing between an antimony trioxide (Sb2O3) masterbatch and neat powder usually weigh dispersion quality against cost per kilogram of flame retardant.

When masterbatch wins: masterbatches precondition Sb2O3 in a PP-compatible carrier, giving cleaner dispersion at typical loadings of 3–5% Sb2O3 paired with 12–20% brominated retardant. Better dispersion means lower dust exposure, fewer agglomerates, and more consistent UL 94 V-0 results across shifts.

When powder wins: high-volume compounders with twin-screw equipment and proper dust control often achieve the same dispersion by feeding Sb2O3 powder directly, avoiding the carrier cost. Powder also suits formulations where the carrier resin could degrade under a second melt history.

Practical criteria: compare final Sb2O3 content per dollar (not unit price), verify the masterbatch carrier matches your PP grade, and confirm whether your brominated co-additive requires high-purity (low lead/iron) Sb2O3. Suppliers such as Zhongti Intelligence can document purity grades and particle size (typically 1–2 µm) to support qualification testing.

Run a small pilot with both formats at identical Sb2O3 loading and compare vertical burn results and filter-pack pressure before standardizing.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们