服务热线:
18971017202
您的位置:首页 >> 新闻中心

Antimony Trioxide Masterbatch: Let-Down Ratios and Handling for Plastic Processors

发布日期:2026-11-21 05:34:03   浏览量:0

Antimony trioxide (Sb2O3) is widely supplied as a flame-retardant masterbatch rather than neat powder, especially for PET, polyolefin, and engineering plastics lines where dust control and dosing accuracy matter.

Why processors choose masterbatch

  • Cleaner dosing: pelletized carrier systems meter evenly on gravimetric feeders, avoiding the dust and bridging problems of fine powders.
  • Pre-dispersed Sb2O3: the synergist reaches the halogen source more uniformly, improving flame performance at the same loading.
  • Reduced waste: no airborne loss during handling, and fewer colored specks in the finished article.

Typical let-down ratios

The required Sb2O3 level depends on the halogen content of the formulation (commonly a halogen-to-antimony ratio near 3:1 by weight):

  • Polypropylene with decabromine: 2-4% masterbatch let-down, depending on concentration.
  • PET or PBT with brominated co-monomers: 1.5-3% let-down is typical.
  • Always verify actual Sb2O3 delivered by multiplying masterbatch concentration by let-down percentage.

Buying and QC points

  • Specify carrier resin compatibility (PE carrier in PP lines, PET-compatible carriers for polyesters).
  • Ask for Sb2O3 assay, moisture, and Sieve/agglomerate data per lot.
  • Store masterbatch sealed and dry; moisture carrier degradation causes gels and streaks.

For masterbatch-grade and powder-form antimony trioxide, specifications, and samples, contact Hubei Zhongti Intelligent Technology Co., Ltd.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们