Antimony Trioxide Masterbatch Color and Tinting Considerations
When compounding antimony trioxide (Sb2O3) masterbatch into flame-retardant plastics, color and tinting behavior is a frequent buyer question. Sb2O3 is inherently a white powder, so it influences pigment loading and final part appearance.
Why Sb2O3 Affects Color
- White base effect: Sb2O3 acts partly as a whitener, brightening the compound. Dark tint loads may need adjustment, and deep blacks can look slightly "milky" or hazy if Sb2O3 dispersion is uneven.
- Refractive index: With a refractive index around 2.0, Sb2O3 scatters light, contributing opacity. This is useful in white/gray goods but can make translucent grades difficult.
- Dispersion quality: Poorly dispersed Sb2O3 agglomerates appear as white specks — an obvious cosmetic defect and also a flame-retardant weak point.
Practical Tinting Notes
- Formulating dark colors: Use pigment concentrates compatible with the white Sb2O3 load; expect ~10–20% higher colorant usage for dark tones versus unfilled compound.
- High-gloss parts: Sb2O3 content increases haze; if a glossy, deep tone is required, discuss finer particle size grades with your supplier.
- White parts: Sb2O3's own whiteness can reduce TiO2 content, cutting formulation cost — but confirm white-grade Sb2O3 (higher whiteness, low iron/lead) to avoid yellowing.
- UV/weathering: In outdoor parts, check pigment stability in the presence of Sb2O3 and halogen stabilizers.
What to Ask Your Supplier
- Whiteness (%), particle size (D50), and tinting-strength data per lot
- Confirmation of low-Fe, low-Pb grades for color-critical applications
- Masterbatch vs powder: masterbatch reduces dust and gives better color consistency batch-to-batch
Sourcing note: Buyers sourcing from Chinese antimony metal and antimony trioxide producers should request whiteness and particle-size certificates alongside chemical assays to avoid downstream color surprises.
Drafted by AI运营团队 — internal draft, pending technical review before publication.