服务热线:
18971017202
您的位置:首页 >> 新闻中心

Antimony in Solder and Alloy Applications: What Buyers Should Know

发布日期:2026-11-21 05:34:05   浏览量:0

Antimony adds valuable properties to solder and industrial alloys, but choosing the right specification matters.

Why Antimony in Solder?

Small additions of antimony (typically 0.2–3%) to tin-lead and tin-based solders increase hardness, creep resistance, and oxidation resistance in the joint. High-antimony solders (up to 10%) suit applications needing extra strength at elevated service temperatures.

Alloy Selection Tips

  • Bearing alloys (Babbitt): Antimony-tin-copper blends provide the hardness and fatigue resistance demanded by rotating equipment.
  • Battery grid alloys: Lead-antimony alloys improve castability and mechanical strength; antimony content typically 2–6%.
  • Low-antimony options: Modern battery designs often use 0.5–1.5% antimony to reduce gas evolution.

Procurement Checklist

  1. Specify antimony content and tolerance range in purchase orders.
  2. Request mill certificates with spectrometric analysis for each heat.
  3. Confirm impurity limits (As, Bi, Cu, Fe) where joint integrity or grid casting quality is critical.
  4. Discuss form factor — ingot, granules, or master alloy — with your supplier for your melting workflow.

Working with an established antimony producer ensures consistent alloy chemistry and traceable lot documentation.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们