服务热线
18971017202
For polyamide 6 (PA6) molders and compounders, antimony trioxide (Sb2O3) is the standard halogen synergist for electrical housings, connectors, and cable ties. Form choice — masterbatch vs. free-flowing powder — affects dosing accuracy, dispersion, and screw wear.
Why masterbatch suits PA6 fine. - Sb2O3 carries a small effective refractive index benefit over titanium dioxide in filled PA compounds. - PA6's narrow processing window (melt temp roughly 225–240 °C; thermal degradation above ~270 °C) rewards clean, low-shear incorporation. A masterbatch (PE- or PA-based carrier, Sb2O3 load typically 70–85%) reduces dust, improves feeder stability, and shortens premix handling. - For short-run or multi-color jobs, masterbatch minimizes cross-contamination between color changes.
Why high-volume compounders still pick powder. - At through-put above ~500 kg/h with twin-screw extruders and pre-dried halogen concentrate, gravimetric powder feed at 3–5% addition is the lowest-cost route. - Powder grade matters: typical Sb2O3 content ≥99.5% (per ISO 2583 / BS 4994 reference methods), particle size 0.8–3.0 µm D50 (finer grades, e.g. 0.5 µm D50, target thin-wall UL-94 V-0 sections where haze and impact must stay stable). - Dust control is non-negotiable: ventilated packing, vacuum pickup, respirators per local OEL (commonly 0.5 mg/m³ TWA for antimony dust).
Addition windows (starting points, validate via UL-94): - PA6 + DBDPO route: 2.8–4.2% Sb2O3, 8–11% bromine for V-0 at 1.6 mm. - PA6 + TBBPA route: slightly higher Sb2O3, 1–2.8%.
A quick three-question checklist before you order: 1. Throughput: below ~300 kg/h → masterbatch; above → powder. 2. UL-94 target section thickness: thin/complex geometry → fine-particle powder grade. 3. Existing carrier compatibility in your feed system.
For buyers sourcing from China's antimony supply chain, confirm per-lot assay, particle size curve, and packaging (25 kg ventilated bags vs. 500 kg FIBC), and align with a supplier whose certificate of analysis shows both purity and D50 per batch.