服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb₂O₃ Masterbatch vs Powder in PP: Color, Dispersion and Dosing Trade-offs

发布日期:2026-11-21 05:34:14   浏览量:0

Polypropylene compounders choosing between antimony trioxide masterbatch and neat powder usually weigh dust, dosing accuracy and cost. The deciding factors are dispersion quality and how color-critical the final part is.

Four decision dimensions

  1. Target UL 94 rating and required Sb₂O₃ loading: high-load formulations favor powder for cost.
  2. Dispersion equipment: twin-screw with good mixing handles powder; single-screw or low-shear lines benefit from pre-dispersed masterbatch.
  3. Color/tint sensitivity: masterbatch gives more uniform whiteness and avoids gray specks from agglomerates.
  4. Dust and EHS: powder creates housekeeping and inhalation issues; masterbatch is pelletized and cleaner.

Dosing notes

Convert target Sb₂O₃ phr to masterbatch let-down using the carrier's active content (typically 60–80%). Verify the actual active content on the COA — quoting 80% while running 70% silently changes flame performance.

Recommendation

Powder for high-load, cost-driven, well-equipped compounders; masterbatch for color-critical, low-dust, small-dose applications. Request a trial run on your own line before switching suppliers.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们