服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb₂O₃ in Polycarbonate and Glazing Compounds: Loading, Optical Clarity and Selection Notes

发布日期:2026-11-21 05:34:15   浏览量:0

Polycarbonate is prized for impact strength and glass-like transparency, so adding any inorganic synergist needs care.

  1. Why Sb₂O₃ is still used: in brominated PC or PC/ABS blends, Sb₂O₃ remains the standard halogen synergist. Typical loading is 3–5% overall, tuned together with the bromine source at the 2:1 to 3:1 bromine-to-antimony ratio.

  2. Optical trade-off: pure PC grades stay clearest with the lowest effective Sb₂O₃ loading and a sub-micron, tightly controlled particle size. Ask for laser-diffraction or COA data per lot.

  3. Processing notes: PC is moisture-sensitive; dry the resin and masterbatch thoroughly (~120 °C) before extrusion because hydrolysis plus fine inorganic powder worsens surface defects. Pre-dispersed masterbatch in a PC or PC/ABS carrier cuts agglomerates and die-block risk.

  4. Casting vs glazing sheet: for skylights and architectural glazing where a smoke-suppression rating matters, confirm the compounder has already balanced Sb₂O₃ against mold-release and UV packages instead of buying raw powder.

  5. Buyer takeaway: spec by particle-size top-cut, carrier compatibility and lot-to-lot consistency rather than price alone — reuse and regrind streams amplify agglomerate problems in clear PC.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们