服务热线:
18971017202
您的位置:首页 >> 新闻中心

What to Check Before Accepting an Sb2O3 Shipment: A Plant-Side Checklist

发布日期:2026-11-21 05:34:16   浏览量:0

For compound masterbatch producers using antimony trioxide (Sb2O3) as a carrier, incoming QC on the raw powder directly sets the ceiling of your finished pellet quality. A practical acceptance routine for each lot:

1. Documentation first. Cross-check the COA against your PO: Sb2O3 assay (typically ≥99.5%), whitelist of heavy metals (As, Pb, Fe, Cd), and the lot number. Any mismatch — stop unloading and query the supplier before sampling.

2. Visual and packaging inspection. Sb2O3 should be a uniform white, free-flowing micro-powder with no caking, discoloration, or foreign matter. Packaging should be intact inner liners in woven or composite bags, clearly labeled with lot ID and production date.

3. Sample and split. Draw samples per a fixed plan (e.g., multiple points across the lot, combined into one composite plus retainers). Retain sealed samples for the full warranty period — most disputes downstream trace back to missing retain samples.

4. In-house verification tests. Whiteness and particle size distribution (D50) on a laser diffraction instrument are fast screeners. If your application is transparent or light-colored polymers, whiteness drifts matter more than nominal purity.

5. Batch consistency over single-lot excellence. Compare this lot's data to your rolling average of previous lots. A lot can pass nominal spec and still wreck your process if D50 or whiteness sits at the edge of its range.

Treat acceptance data as a running curve, not one-off pass/fail events — that's what keeps compounding output stable lot after lot.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们