服务热线
18971017202
For compounders selling into electrical housings, connectors, and appliance enclosures, the antimony trioxide (Sb2O3) grade you buy should be chosen against the finished part's UL94 target, not in isolation. Two practical mapping rules:
1. UL94 V-0 at 1.5–3.0 mm with decabrominated diphenyl ether systems. A 99.5% assay grade is normally sufficient when the bromine source is high-purity and the formulation is well balanced. Spending on higher assay here rarely changes the test outcome.
2. UL94 V-0 at 0.8 mm or thinner sections, or 5VA targets. Thin-wall parts leave less margin for error. At these thicknesses, arsenic and lead trace levels and particle-size distribution start to matter, because impurity-driven side reactions and coarse particles both weaken the char/gas-phase synergy. Specify 99.8%+ Sb2O3 with a defined D50 window and ask the supplier for the lot-specific impurity table.
3. Don't forget the bromine source itself. Many "Sb2O3-related" UL failures trace back to the brominated co-agent's thermal stability, not the antimony synergy. When a V-0 burn result is marginal, first verify the halogen source's degradation profile at processing temperature before blaming or upgrading the Sb2O3.
What to ask for in the RFQ: target UL94 rating and thickness, your bromine system, and the Sb2O3 assay/whiteness/D50 window you want held lot-to-lot. Suppliers who can commit to a certified per-lot COA against that window are the ones that keep your certification audit clean — a lower nominal price with wide lot-to-lot drift usually ends up costing retest fees and production holds.