Antimony trioxide is widely used with decabromodiphenyl ether replacements (such as BDDPE or brominated polystyrene) to flame-retard ABS for housings, appliances, and electronics enclosures. Getting the loading window right matters more in ABS than in PP because impact strength degrades faster.
Typical loading windows
- For UL94 V-0 at 1.6 mm in ABS with brominated PS: roughly 10-14% bromine source with 4-6% Sb2O3. Confirm with yourCompounder's own lab burns; resin lot variation shifts the window.
- For V-2 or 3.2 mm ratings, combined loadings can drop 30-40%, which preserves more of the resin's notched impact value.
Impact strength management
- Sb2O3 itself is a mineral filler; the biggest hit to Izod comes from poor dispersion, not the antimony content itself.
- Masterbatch carriers matched to ABS (SAN-based carriers) disperse faster than generic PE carriers and reduce gels.
- Pre-dry ABS before compounding at 80-90°C to avoid moisture-driven splay that masks true dispersion quality.
Color and haze considerations
- ABS parts are frequently light-colored for consumer goods. High-purity, low-lead Sb2O3 grades minimize the gray shift.
- If titanium dioxide is present, expect modest synergy loss; adjust antimony up slightly rather than doubling bromine.
Procurement checklist for ABS molders
- Ask suppliers for lead content and particle size distribution certificates per lot.
- Pilot on your own screw configuration before committing to annual volumes.
- Negotiate lots on a 12-month price basis if you can accept quarterly true-ups, given antimony price volatility.