服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb2O3 masterbatch vs powder in PP compounds

发布日期:2026-11-21 05:34:28   浏览量:0

Audience: plastics processors and compounders.

For PP flame-retarded compounds, Sb2O3 masterbatch and powder show a same core synergy with brominated flame retardants, but differ on dust, dispersion and dosing accuracy (3:1 halogen/silica ratio and filler loading).

Key points

  • Dust: masterbatch wins, since powder can stick and carry over into machine parts and finished goods during running
  • Dispersion: masterbatch wins, since the pre-dispersed powder is already in a compatible carrier and therefore a more uniform result is expected
  • Cost: powder wins for large volume, as there is no carrier cost and no pelleting
  • Dosage: masterbatch wins for low loadings, since a constant weigher feeding can be used to avoid over/under feed.

Quick guideline

Situation Use
Low FR loading, low dust, high dispersion Masterbatch
Large volume, cost-sensitive, in-house pre-blending Powder
Highly filled or pigmented PP Masterbatch, for a stable color and FR ratio

Notes

  • Check the masterbatch carrier MFI against your PP base; a close flow ensures good wetting
  • For pigmented PP, adjust the antimony level to compensate for color interactions

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们