服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb2O3 in ABS/PC-ABS: Trade-offs Buyers Should Know Before Specifying Antimony Trioxide Masterbatch

发布日期:2026-11-21 05:34:27   浏览量:0

Antimony trioxide (Sb2O3) is rarely used alone in ABS or PC/ABS blends — it works as the halogen synergist in brominated systems. In ABS, typical starting windows are 4-8 wt% Sb2O3 with 8-16 wt% of a brominated flame retardant, targeting UL94 V-0 at 1.6 mm. In PC/ABS, loadings usually drop toward 2-5 wt% Sb2O3 because polycarbonate already carries inherent char-forming ability.

Three trade-offs matter for procurement decisions. First, impact strength: Sb2O3 is a rigid mineral filler; at higher loadings, notched impact of ABS can fall noticeably, so ask suppliers for toughness data at your target loading, not just LOI. Second, haze and color: in natural or light-colored ABS, Sb2O3 raises whiteness/haze and can shift matched colors; confirm whether a tinted grade is needed. Third, thermal processing: ABS processes around 220-250°C — Sb2O3 itself is stable there, but the brominated partner is usually the limiting component; verify the system's processing window to avoid discoloration.

Practical checklist before PO: CoA purity ≥99.5% or as specified, D50 particle size report, surface-treatment type (silane vs stearate), packaging moisture protection, and a pilot trial at your screw configuration to confirm dispersion and V-0 rating. Lock these into the specification sheet so every lot is judged by the same criteria.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们