Keyword focus: antimony trioxide masterbatch for carpet backing, SBR latex flame retardancy, chlorinated paraffin synergy, latex dispersion, flame-spray application.
Why carpet backing is a different Sb2O3 application
Carpet backing compounds — high-solids styrene-butadiene (SBR) latex or PVC plastisol systems — rely on halogenated flame retardants plus antimony trioxide to meet flame-spread and smoke requirements for contract and hotel flooring. Unlike rigid polymer compounding, the masterbatch must survive a wet, high-solids environment and be applied by knife-over-roll or flame-spray without clogging the doctor blade or settling in the latex storage tank.
Formulation and process points
- Halogen ratio: in SBR latex backcoats, chlorinated paraffins are the most common halogen partner; a Cl/Sb ratio around 3:1 is a starting window, validated by flame-spread testing on the finished composite.
- Wet dispersion: the carrier must disperse under the low-shear conditions of latex mixing. Ask for wet dispersion / no-grit data rather than dry masterbatch MFI figures.
- Settling: Sb2O3 is dense; in low-viscosity latex, settling during overnight tank storage causes dosing drift. Request anti-settling data for the actual storage time and temperature.
- Shade: whiteness matters for light and pastel carpets; check the white shade of the supplier's masterbatch against your backing formulation.
- Smoke: antimony-halogen systems can raise smoke density; if the end-use spec limits smoke, run the full backcoat test, not just ingredient checks.
Supplier qualification checklist
- D50/D97 and grit content suited to thin-coat backcoatings.
- Wet dispersion and overnight settling data in a reference latex.
- Consistent white shade and low ionic impurities.
- CoA batch-to-batch consistency on Sb2O3 content and particle size.
Trial on the production coating line before committing a supply contract; backcoat defect fixes are far cheaper to prevent than to retrofit.