服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb2O3 Masterbatch for Epoxy Encapsulation Compounds: Filler Loading, Viscosity Control and QC Verification

发布日期:2026-11-21 05:34:38   浏览量:0

Antimony trioxide (Sb2O3) masterbatch is used in epoxy encapsulation and potting compounds where flame retardancy must be achieved without compromising flow, cure behavior or electrical insulation.

Dispersion and loading. Epoxy systems are sensitive to filler agglomeration, which raises viscosity and creates voids that weaken insulation. A masterbatch with Sb2O3 pre-dispersed in an epoxy-compatible carrier disperses faster under standard mixing. Typical halogen/Sb synergistic ratio remains about 3:1 by weight; verify final loading against the brominated FR already present in the formulation.

Viscosity and cure window. High filler loading can shorten gel time or raise exotherm peak temperature. Run a gel-time comparison (with and without masterbatch at target loading) and keep the shift within 10-15%; larger deviations require reformulation of the accelerator package.

Electrical performance. Moisture and ionic impurities degrade volume resistivity after damp-heat testing. Require CoA moisture < 0.3% and low chloride/iron limits; confirm dielectric properties on cured samples.

Supplier verification. Check D50/D97 particle size distribution, Sb2O3 assay >= 99.5%, whiteness consistency, carrier compatibility with the epoxy resin grade, and batch-to-batch CoA traceability. Run a small potting trial before volume release and retain samples for at least one year.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们