服务热线
18971017202
Antimony trioxide masterbatch can serve as a synergist in halogenated silicone systems and as a flame-retardant aid in niche silicone formulations, but silicone processors should verify compatibility before committing to a grade.
Cure-system interference. Peroxide-cured silicone rubbers are sensitive to acidic additives and to high surface-area fillers that adsorb peroxide. Sb2O3 is mildly amphoteric; masterbatch carriers not designed for silicone can interfere with vulcanization, raising post-cure time or lowering elongation. Trial mixes with a fixed cure package — measuring rheometer cure curves (t90, scorch) before and after masterbatch addition — are the practical screen. If t90 shifts by more than roughly 10–15%, re-balance the peroxide level or pick a softer carrier.
Platinum-catalyzed systems. Platinum-cured silicones are notoriously poison-sensitive (amines, phosphorous, tin compounds). Antimony compounds are generally less inhibiting than sulfur or tin species, but trace impurities in low-cost oxide powder can still affect cure. Masterbatch makers should quote inhibitor-test results or confirm the grade is qualified for addition-cure systems.
Grade and dispersion. Because silicone compounds are often translucent-to-transparent, whiteness and tinting strength matter only where the part is opaque. For structural silicone glazing gaskets or cable jackets, a treated, fine-particle grade (D50 near 0.8–1.0 µm) limits the penalty on tear strength at the 2–5 phr level typical for a 3:1 halogen–antimony balance where halogen sources such as chlorinated paraffins are present.
Supplier checks. Ask each Sb2O3 masterbatch supplier for: purity ≥99.5%, moisture <0.3%, D50/D97 particle-size data, carrier compatibility statement (VMQ/PDMS carriers exist), and a trial-compound cure curve from a comparable durometer base. Batch-to-batch whiteness consistency should come from retained comparison plaques. Keep a retained sample per lot for at least twelve months so cure-shift complaints can be re-run.