服务热线:
18971017202
您的位置:首页 >> 新闻中心

Antimony Tricolor: Antimony Metal, Antimony Trioxide, Antimony Trisulfide (Stibnite) — Key Differences and Industrial Selection

发布日期:2026-11-21 05:34:42   浏览量:0

When sourcing antimony products, buyers frequently encounter three distinct material categories: antimony metal (Sb ingots), antimony trioxide (Sb2O3), and antimony trisulfide (Sb2S3, stibnite concentrate). Although all three share the base element antimony (Sb), their chemical forms, production routes, and industrial roles differ substantially.

Antimony Metal (Sb Ingots)

Refined antimony metal is typically produced at 99.65% (Sb-2), 99.85% (Sb-1), and 99.9% (Sb-0) purity levels per Chinese GB/T 1599 classification. It is used for: - Lead-acid battery grids — antimony hardens lead and improves castability (typically 1.5–3% Sb in lead alloys). - Metallurgical additive — hardening agent in lead alloys for cable sheathing, solder, and bearing alloys. - Feedstock for Sb2O3 production — most trioxide is made by oxidizing refined antimony metal.

Buyers should specify purity grade, impurity limits (As, Pb, Fe, Cu), ingot weight and marking standards.

Antimony Trioxide (Sb2O3)

Antimony trioxide is a white crystalline powder, not a metal. Its dominant use is as a flame-retardant synergist combined with halogenated compounds (Br:Sb ratio near 3:1). Typical grades are 99.5%, 99.8%, and 99.9% Sb2O3, with impurity ceilings for lead, iron, arsenic, and chloride specified in CoA documents. Particle size (D50 usually 0.8–2.5 µm) governs dispersion and tinting strength.

Antimony Trisulfide (Sb2S3 / Stibnite)

Antimony trisulfide occurs naturally as stibnite concentrate (typically 55–65% Sb content in ore/concentrate) and is used principally in: - Matches and pyrotechnics (fuel component in match heads and friction strikers). - Friction materials and ammunition primers. - Pigment and glass additive applications (deep red-orange colorant).

It has limited use in flame retardancy, as sulfur content interferes with halogen-antimony synergy.

Selection and Verification Checklist

  1. Match the chemical form to the application: ingots for metallurgy; Sb2O3 for flame retardance; Sb2S3 for pyrotechnic/friction uses.
  2. Verify purity designation and impurity caps against the CoA, not the commercial grade name.
  3. For Sb2O3: check D50/D97 particle size, whiteness, and moisture (<0.3%).
  4. For ingots: confirm batch traceability and third-party assay for arsenic content.
  5. Contract a defined assay standard (e.g., GB/T or ISO method) to avoid grade ambiguity.
在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们