服务热线
18971017202
Antimony trioxide (Sb₂O₃) masterbatch is a reliable halogen-synergy flame retardant for elastomeric seals and gaskets used in electrical enclosures, cable glands, transformer gaskets, and industrial hose. In rubber and TPE compounds the masterbatch route offers cleaner handling than powder and protects the polymer during mixing.
Carrier compatibility. Match the masterbatch carrier to the elastomer system: EPDM- or EVA-carried grades disperse readily in EPDM and chloroprene compounds; silicone-carried grades suit silicone rubber seals where carbon-silicon backbone compatibility matters. In compression-molded NR/SBR blends, verify the carrier softens at the compounding temperature to avoid stringing in the two-roll mill.
Compression set and filler grade. Seals live under constant deflection, so fine-particle grades (D50 0.8–1.5 µm) are preferred: they disperse into a continuous flame-retardant network without creating stress-concentration points that accelerate compression set. Confirm on the certificate of analysis that D50/D97, antimony content, and moisture (<0.3%) are consistent lot-to-lot; inconsistent D97 shows up as surface pitting on molded seals.
Halogen synergy. Work with your halogen partner at the classic ~3:1 Br/Sb ratio—for brominated systems such as tetrabromobisphenol-A or brominated epoxy oligomers this ratio maximizes the gas-phase quenching effect while minimizing smoke and scorch. Adjust upward slightly if the compound carries mineral fillers that adsorb halogen species.
Qualification checks. Pre-dry hygroscopic carriers before mixing; verify dispersion by compression-molding a thin pad and inspecting for specks; run a compression-set test (22 h at 70 °C or per your spec) and an LOI or vertical-burn check on the final vulcanizate. Keep one retained sample per lot for a year so field failures can be traced back to a specific masterbatch delivery.