服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb2O3 Masterbatch for PP Raffia / Woven Sacks: Dosing & Dispersion Checks

发布日期:2026-11-21 05:34:50   浏览量:0

Woven PP raffia (tapes drawn from PP film or tape lines) is flame-retarded for reusable bulk bags, FIBC liners and industrial packaging. Where a brominated flame retardant (e.g. decabromodiphenyl ethane) is used, antimony trioxide (Sb2O3) masterbatch supplies the synergist; the 3:1 Br:Sb molar ratio remains the reference point when retuning a tape formulation.

Formulation guidance

  • Retune the Br:Sb ratio against measured LOI/UL94 burn data rather than by rule of thumb alone; note the ratio here is by mole, not by weight.
  • Fine grades (D50 ~0.8-1.5 um) disperse fastest in high-shear twin-screw compounding of tape grades and minimize die-screen blockage.
  • Match the masterbatch carrier (PP with MFI close to the tape resin) so tape tensile strength and drawdown ratio are not degraded.

Processing watchpoints

  • Pre-dry masterbatch and PP (typically 2-4 h at 80-100 C) to limit moisture-driven voids and specks on drawn tapes.
  • Watch die pressure and screen pack: Sb2O3 agglomerates plate out and punch pinholes in the tape before it is drawn.
  • Check tape width/thickness uniformity per lot; dispersion faults show up first as streaks in the drawn tape.

Supplier qualification checks (per lot and annual)

  • CoA: Sb2O3 assay >=99.5% (grade-dependent), moisture <0.3%, Pb and Fe within agreed limits.
  • D50/D97 particle size distribution per specification.
  • Whiteness consistent if the sack is printed or color-matched.
  • Retain samples per lot for one year; agree a third-party arbitration lab and requalify the grade annually.
在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们