服务热线
18971017202
Antimony trioxide masterbatch keeps PET strapping tape and PA6 industrial yarn flame-retardant without wrecking the draw line — if the carrier, moisture, and dispersion are all controlled.
Formulation - PET strapping: match carrier IV to base resin (0.70–0.84 dL/g); PA6 yarn: match relative viscosity. Mismatched IV shows up as draw-line breaks. - Dose 3.5–5 wt% Sb2O3 with Br:Sb ≈ 3:1 against DBDPE or brominated epoxy oligomer. - Fine D50 0.8–1.5 µm; coarse particles concentrate at high draw ratios and cause filament breaks.
Processing - Pre-dry PET masterbatch to <0.005% moisture (120–140 °C, 4–6 h) to prevent hydrolysis-driven IV loss. - Watch spinnerette and draw-roller plate-out at high line speeds; schedule die cleaning. - PA6 pre-dry at 80–100 °C under vacuum; excess moisture causes hydrolytic degradation and broken filaments.
QC / CoA checks - Purity ≥99.5%, D50/D97 declared, moisture <0.3%, Pb <50 ppm, Fe <100 ppm. - Per-lot retained sample (200 g, 12 months) tied to tape/yarn batch number for traceability. - Annual supplier requalification; verify tenacity/denier stability on trial tape before committing a lot.