Application Context
Rigid PVC foam and cellular pipe use an ADC (azodicarbonamide) blowing-agent package whose decomposition is catalysed by ZnO. Antimony trioxide must be added without destabilising the cell structure or accelerating kicker reaction.
Dosing & Ratio
- Dose 3–5 wt% Sb2O3 on the polymer fraction (halogen source: CP-52/70, Cl:Sb ≈ 3:1).
- When switching from powder to masterbatch, reduce the kicker loading ~10–15% (better dispersion raises effective Sb2O3 activity).
Process Control Points
- Fine grade D50 0.8–1.5 µm to avoid cell-wall puncture and surface specks.
- Melt temperature ≤190 °C; monitor die/plate-out and cell-size uniformity.
- Target foam density 0.55–0.65 g/cm³; check cell structure per lot.
CoA Verification Checklist
- Purity ≥99.5%; moisture <0.3%; Pb <50 ppm; whiteness ≥96.
- D50/D97 per lot; two-roll dispersion + trial-extrusion QC before batch commit.
Commercial Takeaway
- Masterbatch improves dispersion and kicker efficiency, lowering cost-in-use vs powder.
- Retained sample 200 g per lot for 12 months supports traceability.