Sb2O3 Masterbatch for Rigid PVC Window Profiles: Heat Stability & Weathering Control
发布日期:2026-11-21 05:35:25 浏览量:0
Carrier Selection
- Use rigid-PVC carrier matching the profile K-value (58-65) for optimum fusion and dispersion.
- EVA/CPE polarity-matched carriers are an alternative when impact-modified profile compounds are used.
- Carrier MFI must fall within 10-15% of the base formulation to avoid fusion mismatch and flow defects.
Dosing & Halogen–Antimony Ratio
- Typical dose: 3-5 phr Sb2O3 effective on the polymer fraction.
- With chlorinated paraffin (CP-52/70) as halogen source, target Cl:Sb ≈ 3:1 molar.
- When brominated flame retardants are used, retune to Br:Sb ≈ 3:1 on effective bromine (not compound weight).
Heat Stability & Plate-Out Control
- Run a two-roll mill or torque rheometer heat-stability check; a torque-drop of 10-15% is the red-line threshold.
- Keep melt temperature ≤190°C to limit die and calibration plate-out.
- Pair with Ca-Zn stabilizers; excessive Sb2O3 or unbalanced stabilizer loading raises plate-out and bloom risk.
Moisture & Pre-Drying
- If storage humidity exceeds 60% RH, pre-dry 2-4 hours at 80°C before compounding.
- Moisture <0.3% in the masterbatch protects surface quality and prevents haze or streaking on the profile.
Weathering & End-Product QC
- Validate QUV/xenon weathering data (ΔE tolerance) and gloss retention before batch commitment.
- On finished profiles, check impact, gloss, embossing, and heat-stability retention after aging.
- Verify reaction-to-fire class at the target wall thickness (e.g. EN 13501-1 / B-s1,d0).
CoA Verification Checklist
- Purity ≥99.5%; moisture <0.3%; D50 0.8-1.5 µm; Pb <50 ppm; Fe <100 ppm.
- Whiteness consistency per lot for color stability of white/light profiles.
- Keep 200 g per-lot retained sample for 12 months for traceability and dispute resolution.