服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb2O3 Masterbatch for Rigid & Flexible Polyurethane Foam Insulation

发布日期:2026-11-21 05:35:28   浏览量:0

Application Context

Polyurethane (PU) foams — both rigid (PUR/PIR insulation boards, spray foam, fridge liners) and flexible (seat cushions, acoustic panels) — increasingly require flame-retardant grades. Sb2O3 is dosed as a masterbatch to control dispersion and reactive interactions with the polyol/isocyanate system.

Masterbatch-over-Powder Rationale

  • Dry Sb2O3 powder can interfere with isocyanate reactivity and moisture balance; a masterbatch provides locked-in dispersion, dust-free handling, and lot-to-lot consistency.
  • Carrier must be polyol-compatible (polyether or polyester polyol carrier) so it dissolves into the polyol stream before blending with MDI/TDI — never a thermoplastic resin carrier that would raise viscosity or block dispensing pumps.

Halogen–Antimony Synergy

  • Use a ~3:1 halogen:Sb molar ratio. For flexible foam, chlorinated phosphate esters (TCPP) are common: target Cl:Sb ≈ 3:1. For rigid PIR, brominated polyols or TCPP blends: keep Br:Sb or Cl:Sb ≈ 3:1 on effective halogen.
  • Zinc borate (30–50% of Sb2O3 loading) reduces smoke and improves char; retune the ratio accordingly.

Dosing Windows

  • Flexible foam: 2–4 wt% Sb2O3 on total formulation.
  • Rigid PIR board: 3–5 wt% Sb2O3 on polymer fraction.
  • Adjust for fire-class target (UL94 HF-1 / FMVSS 302 for automotive seating, EN 13501-1 Class B/C for building insulation).

Processing & Reactivity Checks

  • Pre-dry masterbatch 2–4 h at 70–80 °C if stored >60% RH; excess moisture competes with isocyanate and can shift cream time/gel time outside the production window.
  • On trial: record cream time, rise time, tack-free time; a masterbatch with an incompatible carrier or excess moisture shifts these by >10–15% and must be rejected.
  • Cell-structure check: uniform fine cells; coarse/open cells indicate dispersion or blowing-agent interaction problems.
  • For spray foam: check nozzle throughput and cure; masterbatch must not gel the pump.

CoA Verification (per lot)

  • Sb2O3 purity ≥ 99.5%
  • Moisture < 0.3%
  • D50 0.8–1.5 µm (fine grade)
  • Pb < 50 ppm, Fe < 100 ppm
  • Whiteness consistency per lot

Qualification Protocol

  1. Bench trial on 200 g retained sample — check cream/gel/tack-free times and cell structure.
  2. Line trial on finished boards or seat cushions — UL94 / FMVSS 302 / EN 13501-1 at final density.
  3. Keep 200 g per-lot retained sample for 12 months; annual re-qualification of supplier.
在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们