服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb2O3 Masterbatch for PVC/PET Shrink-Sleeve Films

发布日期:2026-11-21 05:35:30   浏览量:0

Application

Shrink-sleeve and heat-shrink label films (PVC or PET) used on beverage and rigid packaging containers. The film is printed, shrunk onto the container, then heat-treated. Flame-retardancy is required when sleeves carry UL or transport-class fire marks; thin-wall (0.02–0.05 mm) geometry makes surface defects and haze highly visible.

Masterbatch-over-Powder Rationale

  • Clean dosing & lot consistency: pre-dispersed Sb2O3 eliminates weigh-up drift and dust on thin-web cast/shrink lines.
  • Defect control: dry powder causes white specks and haze in 0.02–0.05 mm film; a matched carrier delivers fine-grade Sb2O3 without agglomerates.

Carrier Selection

  • Match carrier to resin: PVC sleeves → rigid-PVC (K-value 55–60) or EVA-CPE carrier with declared plasticizer level (DINP/DOA); PET sleeves → PET carrier matched by IV (0.55–0.72) or low-MFI EVA blend.
  • Confirm carrier MFI/polarity compatibility to avoid gel or flow mismatch in thin-web extrusion.

Dose & Synergy

  • Effective Sb2O3 dose: 2.5–4 wt% on polymer fraction.
  • Halogen-antimony synergy: Cl:Sb ≈ 3:1 (with CP-52/70) or Br:Sb ≈ 3:1 (with brominated FRs, e.g. tetrabromobisphenol-A bis(2-hydroxyethyl ether)); retune ratio on effective halogen not compound weight.
  • Optional zinc borate 30–50% of Sb2O3 for smoke/glow suppression (keep total loading within haze budget).

Processing Checks

  • Pre-dry: 2–4 h at 70–80 °C when storage >60% RH (PET hydrolysis risk; PET pre-dry to <0.005% moisture).
  • Melt temperature: PVC ≤190 °C; monitor die/calender plate-out; PET ≤265 °C with hydrolysis watch.
  • Haze/shrink QC: trial film haze <2–3%, transmittance, shrink ratio/force per lot before batch commit.
  • Print adhesion: corona-print ink adhesion check (24 h) on flame-retardant film; FR additives must not migrate to surface.

Qualification (per lot)

  • CoA: purity ≥99.5%, moisture <0.3%, D50 0.8–1.5 µm (fine grade), Pb <50 ppm, Fe <100 ppm, whiteness ΔE <1.
  • End-product: UL94 V-0/VTM-0 at target wall thickness, EN 13501-1 where required; cold-bend −20 °C; heat-aging 70 °C/28 d.
  • Retain 200 g per lot for 12 months; supplier qualification & lot traceability for packaging-grade film.

Supplier Qualification Checklist

  1. Fine-grade D50 0.8–1.5 µm, no coarse fraction (specks in thin film).
  2. Low heavy-metal grade (Pb/Fe) for food-contact packaging-adjacent film.
  3. Whiteness ΔE <1 and per-lot consistency.
  4. CoA per lot + line-trial on finished shrink film before commit.
在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们