Sb2O3 Masterbatch for Food-Contact PET/PP Straws & Disposable Cutlery
发布日期:2026-11-21 05:35:32 浏览量:0
Why masterbatch over powder
- Food-contact mouldings demand clean, dust-free dosing and tight lot consistency — powder addition risks streaking, agglomeration and batch-to-batch colour drift on thin-wall parts.
- A masterbatch with a matched PET (IV 0.55-0.72) or food-grade PP carrier keeps the effective Sb2O3 dose uniform and measurable.
Dosing & synergy
- Typical effective Sb2O3 dose: 2.5-4 wt% on the polymer fraction.
- Pair with ~3:1 halogen:Sb — Cl:Sb with chlorinated paraffins, or Br:Sb on effective bromine (brominated epoxy oligomers / DBDPE-free Br sources).
- Add zinc borate 30-50% of the Sb2O3 weight to cut smoke and reduce afterglow without extra heavy-metal load.
Critical food-contact controls
- Heavy-metal migration is the hard gate for food packaging: run migration tests (e.g. 3% acetic acid / 95% ethanol simulants, 10 days 40°C) and confirm Sb leach stays under the applicable food-contact limit (EU 10/2011 or national standard).
- Prefer fine D50 0.8-1.5µm to avoid white specks on thin walls (0.3-1.0mm) and to keep haze low on clear parts.
- Pre-dry 2-4h 70-80°C (PET <0.005% moisture) to prevent hydrolysis haze and silver streaks.
- Melt ≤190°C (PP) / ≤265°C (PET) — watch die and mould plate-out during long runs.
Supplier qualification & QC
- Require food-contact declaration + per-lot CoA (purity ≥99.5%, moisture <0.3%, Pb <50ppm, Fe <100ppm, D50/D97, whiteness ΔE<1).
- Run trial moulding of straws/cutlery before batch commit: haze, sink marks, wall uniformity, and a migration pass.
- Keep 200g per-lot retained sample for 12 months for traceability.
End-product acceptance
- UL94 V-0 / VTM-0 or the applicable reaction-to-fire class on finished parts (not pellets).
- Food-contact certification per target market (FDA / EU 10/2011 / GB) before export.
- Lot traceability: CoA ↔ batch number ↔ retained sample ↔ migration report, archived ≥5 years.