Application Context
Polyester (PET) fibres and fabrics for transport upholstery, curtains, awnings and
technical textiles require FR performance without sacrificing tenacity or handle.
Adding Sb2O3 via masterbatch instead of loose powder gives clean dosing, uniform
dispersion and lot-to-lot consistency on spinning and weaving lines.
Masterbatch Selection
- Use a PET-compatible carrier matched to fibre-grade intrinsic viscosity (IV ~0.55–0.72),
so melt flow and drawability are not disturbed.
- A low-MFI EVA or polyester-elastomer carrier may be used for blended yarns; verify
compatibility by a small spinning trial before batch commit.
- Effective Sb2O3 loading: 2.5–4 wt% on the resin phase for most upholstery and drapery
specs (3:1 Br:Sb retained on effective bromine).
Processing Checks
- Pre-dry PET to <0.005% moisture to prevent hydrolysis embrittlement and filament breaks.
- Melt window ≤265°C; watch plate-out on spinnerette and draw rollers.
- Dispersion proxy: screen-pack pressure rise and filament breakage rate.
- Tenacity retention after draw <10% drop; check fabric LOI/vertical-burn on finished
cloth, not on the raw masterbatch.
CoA Verification per Lot
- Purity ≥99.5%, moisture <0.3%, D50 0.8–1.5 µm, Pb <50 ppm, Fe <100 ppm, whiteness ΔE <1.
- 200 g per-lot retained sample for 12 months; annual requalification of supplier batch.