服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb2O3 Masterbatch for Melt-Blown PP Nonwoven Filtration Media: Dispersion, Hot-Edge Plate-Out & Air-Permeability QC

发布日期:2026-11-21 05:35:51   浏览量:0

Melt-blown polypropylene filter media (HEPA/EPA pre-filters, liquid coalescers, N95/BFE layers) is the most dispersion-critical Sb2O3 application: fiber diameters of 1–5 µm mean any agglomerate larger than ~2 µm becomes a visible defect and a downstream filtration weak point.

Why masterbatch over powder here - Powder additions into a 400+ m³/h air-drawn melt flow risk unmelted specks that punch pinholes through the web; a high-MFI PP carrier (MFI 35–60) masterbatch shears uniformly. - Masterbatch guarantees lot-to-lot whiteness — critical because white specks and yellowing both trigger customer complaints on white filter media.

Dosing & chemistry - Effective Sb2O3 loading: 2.5–4 wt% on polymer (filtration media rarely exceeds Class 1 flame specs; don't over-dose at the cost of pressure drop). - Br:Sb ≈ 3:1 with brominated SPS or brominated epoxy oligomer; avoid decabromodiphenyl ethers passing 325 °C melt temperature — oligomeric brominated FRs are thermally safer here. - Zinc borate 30–50% partial substitution where smoke toxicity matters (mining, public transport).

Process control points - Hot-edge plate-out: Sb2O3 volatiles deposit on die tips within 2–4 h; schedule die-tip brush-downs and monitor spinneret pressure. - Air permeability is the QC proxy — Sb2O3 shifts fiber diameter distribution; verify Gurley/Darcy numbers per lot vs. reference. - Melt temperature ≤230 °C; brominated additives limit residence time. - Pre-dry 2–4h at 80 °C when storage humidity >60% RH to avoid micro-bubbles in fibers.

CoA qualification per lot Purity ≥99.5%, moisture <0.3%, D50 0.8–1.5 µm (fine grades mandatory — coarse particles create fiber discontinuities), Pb<50ppm, Fe<100ppm (Fe catalyzes PP oxidation in filters used at elevated temperature).

Verification: LOI/vertical-burn on finished web composite (not pellets), fiber diameter SEM spot-check ±10% vs. baseline, pressure-drop at rated face velocity.

Retained sample: 200g per lot, 12 months. Annual requalification against original supplier benchmark.

Source: production-proven practice for melt-blown FR filter media compounding.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们