服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb2O3 Masterbatch for Corrugated HDPE Drainage Pipe & Dual-Wall Duct: Dosing, Corrugation Line Stability & Qualification Checklist

发布日期:2026-11-21 05:35:52   浏览量:0

Application: Corrugated HDPE/PP drainage pipe, dual-wall cable duct, agricultural tile drainage (EN 13476 / AASHTO M252 class).

Why masterbatch over powder: corrugation lines run 15–30 m/min; powder dosing fluctuates at the vacuum feeder and shows up as wall-strength variation between corrugation peaks. Masterbatch gives gravimetric dosing accuracy ±1%, dust-free, lot-to-lot consistent ash.

Key parameters - Carrier: HDPE (MFI 0.3–1.0, pipe grade, matched to resin within ±10–15%) — no wax-rich carriers that lower melt strength needed for vacuum sizing. - Dose: 3–5 wt% effective Sb2O3 on polymer fraction. - Halogen ratio: Cl:Sb ≈ 3:1 with chlorinated paraffin CP-52/70, or Br:Sb ≈ 3:1 with DBDPE (retune on effective halogen). - Smoke suppression: zinc borate 30–50% substitution where reaction-to-fire class demands it. - Pre-dry: 2–4 h @ 80 °C when storage RH > 60%. - Melt temp ≤ 200 °C; watch die & corrugator mandrel plate-out at vacuum ports.

QC / qualification - Final pipe: ring stiffness ≥ SN4 unchanged <10% drop, EN 13501-1 reaction-to-fire at declared wall thickness, socket fusion / belling test. - CoA: purity ≥ 99.5%, moisture < 0.3%, D50 0.8–1.5 µm, Pb < 50 ppm, Fe < 100 ppm, whiteness ΔE < 1. - 200 g per-lot retained sample, 12 months; annual requalification.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们