服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb2O3 Masterbatch for Rigid PVC Electrical Conduit & Cable Trunking: High-Speed Extrusion Best Practices

发布日期:2026-11-21 05:36:00   浏览量:0

Rigid PVC conduit (EN 61386-1/UL 651 class) and cable trunking profiles run at the fastest line speeds in profile extrusion, so the Sb2O3 masterbatch must feed cleanly and disperse quickly.

Formulation basics - Dose 3–5 phr effective Sb2O3 (rigid PVC, K-value 58–65); halogen is abundant in PVC itself, so hold Cl:Sb ≈ 3:1 and only retune if adding CP-52/70 as a co-stabilizer. - Carrier: rigid-PVC-compatible (EVA-CPE blend), MFI/extrusion pressure matched so the dry blend flows identically with and without masterbatch. - Fine grade D50 0.8–1.5 µm: prevents white specks on the printed/embossed surface at high line speed.

High-speed extrusion checks - Die pressure and melt temperature: watch for plate-out at the die lip and calibration sleeve; melt ≤190 °C. - Impact strength (Charpy, 23 °C) and Vicat softening point: ≤10 % drop vs non-FR reference. - Reaction-to-fire per EN 61386 and wall-thickness-corrected UL94 V-0 on finished conduit, not pellets.

Supplier qualification (per lot) - CoA: purity ≥99.5 %, moisture <0.3 %, Pb <50 ppm, D50 0.8–1.5 µm, whiteness ΔE<1. - Trial on production line; keep 200 g retained sample per lot ≥12 months; annual requalification.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们