服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb₂O₃ Masterbatch for Rigid PVC Window Profile Gaskets: Co-Extruded Soft-PVC Beads

发布日期:2026-11-21 05:36:00   浏览量:0
  • Application: co-extruded soft-PVC gasket beads on rigid PVC window profiles (double-duro), plasticizer-heavy flexible PVC carrier with declared DINP/DOA content, masterbatch-over-powder.
  • Dosing: 3–5 phr effective Sb₂O₃, Cl:Sb ≈ 3:1 with CP-52/70 halogen source; retune to Br:Sb ≈ 3:1 if brominated FRs are used.
  • Key risks: plasticizer bloom whitening on insertion pads; plate-out at the co-extrusion die; loss of compression-set recovery after heat aging.
  • Checks: fine grade D50 0.8–1.5 µm; compression-set 22 h/70 °C ≤10%; corn-insertion force and weld-seal integrity per lot; QUV/weathering ΔE on exposed bead face.
  • CoA: purity ≥99.5%, moisture <0.3%, Pb <50 ppm, Fe <100 ppm, whiteness ΔE<1.
  • Process: two-roll dispersion check on soft compound before co-extrusion; pre-dry 2–4 h at 70–80 °C when storage RH >60%.
  • Traceability: 200 g per-lot retained sample, 12 months; annual requalification.
在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们