服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb2O3 Masterbatch for Solar Backsheet & PV Module Encapsulant Films

发布日期:2026-11-21 05:36:01   浏览量:0

For photovoltaic backsheets and UV-filter outer layers, flame-retardant dosing must not compromise weathering life. Use a masterbatch over powder: dust-free dosing, lot-to-lot consistency, and pre-dispersed fine grade D50 0.8–1.5µm to avoid gels and optical defects on thin films (0.2–0.35mm).

Dosing: effective Sb2O3 2.5–4 wt% with Br:Sb ≈ 3:1 on effective bromine; brominated polycarbonate oligomer or brominated epoxy is preferred for high processing temperature (melt ≤265°C for PET-based laminates). Verify Sb2O3 purity ≥99.5%, Pb <50ppm, Fe <100ppm per CoA; anti-hydrolysis packaging matters for PET pre-dry <0.005% moisture.

QC at trial: yellow-index (YI) drift and haze on laminated coupons, peel strength between EVA/POE and backsheet film, partial-discharge-free module lamination, and ΔE <2 after 1000h QUV at 85°C/85%RH damp-heat.

Supplier qualification: batch traceability CoA-to-lot, 200g retained sample 12 months, annual requalification.

— 湖北中锑新能源材料

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们