Rigid PVC corrugated roofing and wall cladding panels run outdoors for decades. For compounds with halogenated flame-retardant packages, antimony trioxide (Sb2O3) masterbatch is the preferred dosing route over dry powder for high-speed sheet extrusion lines.
Why masterbatch over powder on sheet lines
- Dosing accuracy: gravimetric blending of a pelletized masterbatch holds effective Sb2O3 within ±2% versus ±8–10% for powder side-feeders on co-rotating lines.
- Dispersion: pre-dispersed fine grades (D50 0.8–1.5 µm) eliminate refractive white specks that powder addition leaves on translucent ribbed panels.
- Dust & hygiene: no airborne pigment-grade dust in the extrusion hall.
Formulation guidance
- Carrier: rigid-PVC K-value 58–65 masterbatch carrier (or EVA-CPE for polarity matching on high-impact corrugated formulations).
- Dose: 3–5 phr effective Sb2O3, Cl:Sb ≈ 3:1 with chlorinated paraffin CP-52/70, or Br:Sb ≈ 3:1 retuned on effective bromine when a brominated FR is used.
- Processing: melt temperature ≤190 °C; watch die and calibration-table plate-out on long runs; pre-dry compound 2–4 h at 80 °C when resin storage exceeded 60% RH.
End-product QC before lot commit
- Reaction-to-fire class verified at the panel wall thickness, not ingredient level.
- QUV/xenon weathering ΔE and impact retention after exposure per contract.
- Two-roll heat-stability trial: torque drop line is 10–15%; beyond, investigate stabilizer/FR interaction first.
Supplier verification (CoA per lot)
Purity ≥99.5% | Moisture <0.3% | D50 0.8–1.5 µm | Pb <50 ppm | Fe <100 ppm | Whiteness | 200 g retained sample, 12 months.