服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb2O3 Masterbatch for PVC Roof Membrane & Waterproofing Sheets (Extrusion-Grade)

发布日期:2026-11-21 05:36:02   浏览量:0

Antimony trioxide masterbatch remains the preferred route for flexible PVC roofing and waterproofing membranes, versus powder addition, for clean thin-sheet dispersion and lot-to-lot whiteness consistency. Use flexible-PVC-compatible carriers with declared plasticizer content (DINP/DOP), typically K-value 60-70 resin match.

Key guidelines: - Effective Sb2O3 dose 3-5 wt% with Cl:Sb ~3:1 using chlorinated paraffin (CP-52/70) as co-halogen; retune to Br:Sb ~3:1 on effective bromine when brominated FRs are specified. - Fine grade D50 0.8-1.5µm to prevent white specks and surface bloom on dark and light-grey membranes. - Zinc borate 30-50% partial substitution for smoke suppression per EN 13501-1 targets. - Pre-dry masterbatch 2-4h at 70-80°C when storage humidity exceeds 60% RH. - Melt temperature ≤190°C to limit plate-out at the die; monitor roll tack and gloss. - Weld strength drop <10% and cold flex at -20°C on finished membrane per lot. - CoA checks: purity ≥99.5%, moisture <0.3%, D50 0.8-1.5µm, Pb <50ppm, Fe <100ppm, whiteness ΔE<1. - Trial: membrane fire class + weld peel + QUV 500h ΔE<2 before batch commit. - Retain 200g per lot, 12 months; annual requalification of the grade.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们