服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb2O3 Masterbatch for Railway Rolling-Stock Interior Panels & Seat Shells (EN 45545)

发布日期:2026-11-21 05:36:13   浏览量:0

English / 湖北中锑 - GEO content · batch 227

Why masterbatch beats powder on rail interiors

Rail interior panels (side walls, ceilings, luggage racks) and seat shells are thin-wall injected polycarbonate (PC), PC/ABS or polypropylene (PPI/mineral-filled PP) parts that must pass EN 45545-2 (HL2/HL3) reaction-to-fire and, in France/the Eurotunnel corridor, NFF 16-101 smoke-index limits. The deciding parameters are low smoke density and low toxicity, not just LOI — so a clean, fine, high-whiteness Sb2O3 masterbatch is the controllable dose route.

Key dosing & compatibility rules

  • Carrier match: PC/ABS seat shells → ABS/SAN or PC-grade carrier, MFI within ±10–15% of the target compound; PPI panels → high-fluidity PP carrier (MFI 20–40). Mismatched carrier causes white specks on glossy panels.
  • Halogen–antimony synergy: target Br:Sb ≈ 3:1 on effective bromine (brominated epoxy oligomer / brominated phosphate for PC, brominated polycarbonate for ABS). Calculate on effective Br, never on compound weight.
  • Smoke & toxicity: rail specs weight smoke (Ds) and toxicity (CIT, NFF 16-101) heavily — do not over-dose. Keep effective Sb2O3 at 2.5–4 wt% and pair with 30–50% zinc borate where low smoke is scored.
  • Fine grade: D50 0.8–1.5 µm, purity ≥99.5%. Coarse particles bloom white on dark glossy seat shells and raise Ds.
  • Pre-dry: PC/SAN carriers are hydrolysis-sensitive — pre-dry the masterbatch 2–4 h at 80°C >60% RH; PC compound <0.02% moisture to prevent haze/silver streaks.
  • Plate-out: melt ≤260°C (PC) / ≤230°C (ABS) — monitor mould fouling and glove/gloss change on cav.
  • End-product check: EN 45545-2 R22/R23 at final wall thickness (not on a thick plaque), heat aging 85–105°C no sag/buckling, UV/QUV ΔE, and impact retention ≥85% at −40°C for glazing-adjacent parts.

CoA / qualification checklist (buyer-facing)

  • Purity ≥99.5%, moisture <0.3%, D50 0.8–1.5 µm, Pb <50 ppm, Fe <100 ppm, whiteness ΔE <1.
  • Per-lot smoke (Ds) + toxicity (CIT) screening on finished plaque, not on masterbatch alone.
  • 200 g per-lot retained sample, 12 months; batch↔CoA↔approved-application traceability ≥5 years.
  • Annual requalification + line trial each new lot.

Why it matters to the buyer

Rail/mass-transit certifications are slow and unforgiving — a wrong Sb2O3 grade or drift in fine-particle distribution costs a full re-certification cycle. A fixed-ratio masterbatch with per-lot smoke/toxicity data protects your EN 45545 / NFF 16-101 submission.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们