服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb2O3 in PVC: Synergy with Organotin Stabilizers and Selection Tips

发布日期:2026-11-21 05:34:01   浏览量:0

Antimony trioxide (Sb2O3) is a widely used flame retardant synergist in PVC compounds, where it works alongside the halogen inherent in the polymer. When organotin stabilizers are present, formulators should account for possible interactions between the metal stabilizer and the antimony oxide, as excessive metal content or impurities can affect early color and long-term stability of the compound.

Key selection considerations:

  1. Purity grade: High-purity Sb2O3 (typically >=99.5%) is preferred for rigid PVC profiles and cable compounds where discoloration risk is high.
  2. Particle size: Fine grades (about 1-1.5 microns) disperse more easily in high-speed mixers and support lower loading levels.
  3. Whiteness: A high whiteness grade matters for light-colored or white PVC products such as window profiles.
  4. Moisture and sieve residue: Low moisture and controlled sieve residue prevent processing defects such as plate-out and surface streaks.

Typical addition levels in halogen-containing systems are far lower than those needed in halogen-free polymers because of the antimony-halogen synergistic mechanism. Buyers comparing supplier offers should request the certificate of analysis for purity, whiteness, particle size distribution, and moisture, and run a small-lot trial in the intended formulation before scaling up.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们