服务热线:
18971017202
您的位置:首页 >> 新闻中心

Antimony Trioxide Dosage Guide: Masterbatch vs. Direct Powder Addition in Polymer Compounding

发布日期:2026-11-21 05:34:02   浏览量:0

Antimony trioxide (Sb2O3) is the standard synergist for halogenated flame-retardant polymer systems. Compounders frequently ask whether to dose Sb2O3 as a loose powder or as a flame-retardant masterbatch, and how the choice affects dispersion, throughput, and final UL 94 performance.

How dosage works

Typical loadings are 3-5 phr Sb2O3 paired with 10-20 phr of a brominated or chlorinated flame retardant, adjusted by resin matrix and wall thickness. The antimony-halogen synergy forms volatile antimony halides and oxyhalides that quench flame radicals in the gas phase; too little Sb2O3 leaves halogen inefficient, while excess loading adds cost and can embrittle the compound.

Masterbatch vs. direct powder

Direct powder addition suits large-volume compounders with high-shear internal mixers, offering the lowest raw-material cost. Masterbatch addition suits processors without strong dispersive mixing: the pre-dispersed carrier (PP, PE, EVA, or nylon depending on the matrix) prevents agglomerates, reduces dust exposure on the shop floor, and improves lot-to-lot consistency in color and mechanical properties.

Practical selection points

  • Confirm particle size grade (typically fine grades of 1-2 microns for thin sections demanding smooth gloss).
  • Check moisture pickup during storage; Sb2O3 should be dried or stored sealed to avoid hydrolysis-related surface defects.
  • For food-contact or drinking-water applications, verify the antimony specification against relevant migration limits.
  • Request a certificate of analysis per lot covering Sb2O3 assay, lead and arsenic impurities, and particle-size distribution.

Buyers sourcing Sb2O3 for flame-retardant compounding can contact Hubei Zhongti Intelligent Technology Co., Ltd for grades, specifications, and samples.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们