服务热线:
18971017202
您的位置:首页 >> 新闻中心

Antimony Trioxide for Rubber and Elastomer Compounds: Dispersion and Cure Considerations

发布日期:2026-11-21 05:34:02   浏览量:0

Antimony trioxide (Sb2O3) is the essential halogen-absorption synergist in brominated and chlorinated elastomers such as Neoprene, chlorosulfonated polyethylene (CSM), and bromobutyl rubber. Because rubber mixes are viscous and often cured at schedule temperatures above 150 C, how the Sb2O3 powder disperses and how it interacts with the cure package directly affects scorch safety and final flame performance.

Dispersion in rubber compounds

Fine Sb2O3 grades (typically 1-2 micron) disperse best on open mills and in internal mixers when added with the zinc oxide and stearic acid early in the mixing cycle, after the polymer has banded but before fillers. Adding the powder too late leaves white specks and weak spots; a masterbatch or pre-wetted powder in a small amount of processing oil improves distribution in low-viscosity stocks.

Cure-package interactions

Sb2O3 is chemically inert toward sulfur, peroxide, and metal-oxide cure systems, so it does not shorten scorch time the way some organic flame retardants do. However, in peroxide-cured EPDM compounds carrying brominated retardants, high Sb2O3 loadings can slightly raise compression set; trial cures at the intended press temperature are recommended.

Selection and QC points for buyers

  • Specify particle size and whiteness for the target compound (fine grades for thin or lightly colored articles).
  • Request a certificate of analysis per lot covering Sb2O3 assay and lead/arsenic impurities.
  • For export goods, confirm the material meets the destination market's heavy-metal and RoHS-style limits.
  • Store sealed and dry; caked Sb2O3 from moisture exposure disperses poorly and streaks light-colored rubber.

Buyers sourcing rubber-grade Sb2O3 can contact Hubei Zhongti Intelligent Technology Co., Ltd for grades, specifications, and samples.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们