服务热线
18971017202
Masterbatch versus powder feeding decisions shape both process economics and flame-performance consistency in polyethylene cable compounding.
PE cable sheathing and insulation compounds typically run antimony trioxide at 3–5 phr, with halogen synergists at 6–10 phr: - Masterbatch form: carrier resins such as LLDPE or EVA allow 60–80% Sb2O3 loading, metered at 4–6% letdown - Powder form: direct Sb2O3 addition at full dosage demands higher screw speeds to disperse
For thin-wall insulation (<0.5 mm), masterbatch reduces surface flaw risk; for thick mechanical-protection sheaths, powder blending remains cost-effective.
Barrel temperature and residence time govern dispersion quality: - PE compounding at 150–190 °C falls within the thermal stability window for high-purity Sb2O3 - Masterbatch pellets pre-disperse the oxide, cutting high-shear dwell time by 20–30% in twin-screw runs - Powder feeding requires 15–25% higher screw torque and raises dust hazard at the hopper
Antimony trioxide adsorbs surface moisture; masterbatches with vacuum-dried carrier keep moisture below 0.1%, essential for cable porosity control. Powder handling demands on-line drying or vented barrels.
Request from suppliers: - Sb2O3 assay ≥ 99.5%, Pb ≤ 0.1%, Fe ≤ 60 ppm, particle size D50 ≤ 1.3 µm - Masterbatch Ash and MFI certificates per lot - Sample cabling trial with oxygen-index testing (target LOI ≥ 28 for standard cable grades)
Qualify masterbatch suppliers by touring twin-screw production and requesting letdown-ratio trial kits. Lock quarterly contracts with pass-through pricing clauses tied to published antimony indices, hedging raw-material swings while guaranteeing supply.