服务热线
18971017202
Antimony trioxide (Sb2O3) masterbatch is a suspension of fine powder in a polymer carrier — and like any suspension, it can settle, agglomerate, or pick up moisture between the supplier's plant and your extruder. Most "masterbatch dispersion complaints" trace back to storage and handling, not the original dispersion quality.
1. Keep it dry and sealed. Sb2O3 itself is non-hygroscopic, but masterbatch pellets with degraded carrier can absorb surface moisture, causing pre-plasticizing clumps and fisheyes downstream. Store bags sealed on pallets off concrete floors, away from humidity swings, and rotate stock first-in-first-out.
2. Mind the container aging. Original packaging is usually a moisture barrier — once opened, re-bag tightly. Partially used boxes left open for weeks are the most common source of poor pellet integrity and dust-out at the feeder.
3. Check for settling or hard sediment before feeding. For older stock, briefly tumble or knead the bag to restore uniformity. Do not cut open and feed directly if pellets feel crumbly or cemented — screen a sample first.
4. Verify re-dispersion at the machine, not in the bag. A quick trial run on a small batch with your normal screw profile tells you whether dispersion is still intact. Look for color/whiteness streaking, gels, or specks on the finished part.
What to ask for from the supplier: recommended storage temperature and humidity range, maximum recommended shelf life before a re-dispersion check, and whether the carrier is compatible with your processing temperature. A good masterbatch supplier answers all three up front and stands behind the material for the stated shelf life.