服务热线:
18971017202
您的位置:首页 >> 新闻中心

Using Recycled Plastics with Legacy Flame Retardants: Screening for Old Sb2O3 and Bromine Residues

发布日期:2026-11-21 05:34:18   浏览量:0

Why recyclers need to think about flame retardant carryover

Post-consumer and post-industrial plastic streams increasingly flow back into new compounds — and some of those streams contain legacy flame retardant packages: brominated compounds paired with antimony trioxide (Sb2O3) synergist. If you are compounding or molding with recycled content, unexpected Sb2O3 and bromine carryover can affect color, melt flow, and regulatory compliance of your finished parts.

1. Screen incoming regrind and regrind blends. A quick XRF scan on incoming recycled material flags elevated antimony and bromine levels in seconds, before that material enters your blender. Establish a simple pass/fail threshold for each resin grade you buy.

2. Know your sources. Electronics housings, TV backs, and certain appliance parts were historically flame retardant; automotive interior trim often was not. Sorting by source application dramatically reduces the odds of surprise FR carryover.

3. Watch the interactions in the melt. Residual bromine plus residual Sb2O3 can interact under high heat. In extreme cases this shows up as discoloration, plate-out on dies, or processing odor. If levels are low but nonzero, run trial batches and inspect both the melt and the part surface.

4. Be transparent downstream. If your recycled compound carries a measurable FR residue, document it. Your customers' own compliance teams will ask — and having the data on paper (total Br, total Sb, source history) builds far more trust than "we think it's clean."

What to ask your regrind supplier: source application history, any XRF or ICP data they already hold, and whether lots are segregated by origin. A supplier who can answer those three questions is far easier to build a long-term recycled-content program with.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们