服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb2O3 in flexible polyurethane foam: halogen synergy, dosage windows and masterbatch dispersion

发布日期:2026-11-21 05:34:29   浏览量:0

Antimony trioxide (Sb2O3) is a halogen-synergy flame retardant, not a stand-alone FR. In flexible polyurethane foam it raises LOI only when a halogenated or halogen-donating active (e.g. TCPP, chlorinated phosphate esters, TBBPA, brominated aromatic polyols) is present in the formulation.

Dosage windows

  • Slabstock foam with chlorinated phosphate FRs (TCPP/TDCP): Sb2O3 addition 1-3 phr is typical; loading beyond ~3 phr increases foam brittleness and scorch risk without proportional LOI gain.
  • Halogenated aromatic systems (brominated polyols, decabromodiphenyl ethane): use an Sb:Br mass ratio near 1:3 as the starting reference, then optimize by LOI and vertical burn (TB 117, Cal 117-2013) testing at target foam density.
  • Phosphorus-only systems: Sb2O3 generally does not help and can show P-Sb antagonism (acid cross-linking). Verify with cone calorimetry or LOI screening before adding Sb2O3 to P-based FR packages.

Dispersion and cell-wall integrity

Foam cell walls are only 50-200 um thick, so undeagglomerated Sb2O3 particles become weak points that promote char cracking and drip.

  • Prefer a coated-grade Sb2O3 masterbatch (polyether-polyol or plasticizer carrier, 60-80% active) pre-dispersed to <5 um domains.
  • Check masterbatch compatibility with the active polyol: acidic carriers can neutralize amine catalysts and slow foam rise; measure viscosity rise and cream time before scale-up.
  • Avoid excessive shear during mixing, which can shear-thin the reacting foam and shrink cell structure.

Processing checkpoints

  1. Confirm LOI (target typically >= 23 for furniture foam) and vertical burn pass at the commercial density.
  2. Inspect for scorch discoloration; catalyzed halogen systems can exotherm during cure.
  3. Check fogging and VOC against automotive or home-furnishing limits.
  4. Batch-to-batch consistency: CoA should list Sb2O3 assay >= 99.5%, As and Pb trace limits, and particle size D50.

Procurement notes for foam producers

Specify grade (coated/uncoated), carrier type, active content, and whiteness (>= 95 for light-colored foams). Request assay, trace metal, and laser particle-size distribution certificates with every lot; retain sealed samples 12-24 months for dispute arbitration.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们