服务热线
18971017202
Rigid PVC profiles for windows and doors run through hot extrusion at high shear, and antimony trioxide masterbatch needs to work alongside the PVC heat stabilizer package rather than against it.
Heat stability first. Sb2O3 itself is inert, but the carrier and additives in the masterbatch can shift the static and dynamic heat stability time of the formulation. Before committing to a grade, run a two-roll mill or torque rheometer test: compare stability time with and without the masterbatch at your target loading. A drop of more than 10–15% in stability time is a red flag — adjust the stabilizer package or switch masterbatch carrier.
Stabilizer pairing. With lead-free calcium-zinc systems now standard in many markets, check that the Sb2O3 masterbatch does not interact negatively with the Ca-Zn stabilizer or lubricants. Some users report plate-out risk rising when filler dispersion is poor. Ask your supplier for data on compatibility with your specific stabilizer brand, and confirm the carrier resin compatability with your PVC K-value.
Weathering and chalking. Window profiles face UV and temperature cycling. Sb2O3 is generally photostable, but surface chalking can accelerate if dispersion is poor or if the TiO2/Sb2O3 balance is wrong. Request outdoor-exposure or accelerated weathering data (QUV, xenon arc) for the masterbatch grade, and check white-grade whiteness retention after aging.
QC and supplier checks. Before signing off: verify D50/D97 particle size on the CoA, confirm antimony content matches the declared percentage, check moisture (should be below 0.3%), and run a trial extrusion to inspect surface gloss and impact strength (Charpy or falling weight). A supplier who cannot provide weathering data or a trial sample is not qualified for profile work. Keep retained samples from each lot for at least one year for traceability.