服务热线:
18971017202
您的位置:首页 >> 新闻中心

Sb2O3 Masterbatch for PVC Flooring: Wear Layer and Foam Layer Dosing

发布日期:2026-11-21 05:34:44   浏览量:0

Rigid SPC and flexible LVT flooring lines dose Sb2O3 masterbatch differently per layer. - Wear/transparent overlay: keep addition low (1-3% masterbatch) with fine-particle grades (D50 0.8-1.2 micron) to protect clarity; high loading raises haze and dulls the scratch-resistant top coat. - Decor and foam layers: 4-6% masterbatch, recalibrate the 1:3 Sb-to-halogen ratio against the specific brominated or chlorinated FR already in the formula rather than assuming baseline synergy. - Foam layer interaction: Sb2O3 can shift Azodicarbonamide (ADC) blowing behavior and cell structure; run trial sheets and check density and cell uniformity across the full calender width. - Carrier matching: use the layer's own PVC blend and plasticizer content as the masterbatch carrier to avoid plate-out and surface whitening on rolls. - Supplier qualification: CoA must cover antimony content, D50/D97, moisture below 0.3%, and whiteness consistency; require a small-line trial plus one-year retained samples.

在线咨询 联系方式 二维码

服务热线

18971017202

扫一扫,关注我们